The Kreepy Krauly® Prowler® pool cleaner, manufactured by Pentair, is a computer-controlled, programmed robot that vacuums and scrubs the bottom of the pool, the walls, and steps. It also supplies a supplemental filtration system for the pool water, unique to the
Kreepy Krauly® Prowler®. Pool cleaner repair is a necessary part of all pool cleaning regimens.
For robots like the
Kreepy Krauly®
Prowler®, pool cleaning repair consists of more than just the replacement of a worn belt or a frayed cord that has seen a lot of activity. Computer components, especially the models with remote control, and electronics naturally wear out from use and require professional, qualified care. When you purchase your
Kreepy Krauly®
Prowler, pool cleaner repair programs can be established with your vendor to ensure the smooth operation and maintenance of your equipment.
Kreepy Krauly®
Prowler® Replacement Parts
Any moving part on all equipment is subject to the need for repair and possible replacement. Your vendor will be able to facilitate this for you.
Kreepy Krauly®
Prowler® pool cleaner repair is part of the service that most vendors, like Aquaquality Pools and Spas, provide. From pin plugs, through sleeve rollers to filter bags, replacement parts are easily available.
Make sure that you submit your warranty and register your
Kreepy Krauly®
Prowler® pool cleaner for repair so that when you do have need to either fix or replace a part, you can order the service right away with no delay. The more frequently you use your
Kreepy Krauly®
Prowler®, the more likely that you will need to replace filter bags, drive belts, drive screens, and the remote control unit. Your
Kreepy Krauly®
Prowler® pool cleaner repair will be fast and efficient with a clear line of communication to your dealer and concise information on the problem you are having.
Troubleshooting Your
Kreepy Krauly®
Prowler® Pool Cleaner
Repair for your equipment is best handled by a professional. A licensed or certified electrician knows how to care for your robot because he is trained and can avoid mishaps which could result in personal injury. The first step is to make sure that the unit is unplugged. Then refer to your manual, obey all the safety warnings, and look for any trouble shooting tips for your
Kreepy Krauly®
Prowler® pool cleaner repair.
Following are three of the more common
Kreepy Krauly®
Prowler® pool cleaner repair needs and/or problems, and their solutions:
1. Slower motion or inefficient vacuuming may be a result of a dirty or clogged filter bag. Because the filter bag is capable of filtering tiny particles that are 20 times smaller than the eye can see, you may need to be more thorough.
2. No water pressure or flow from the hydroscrub jet tubes could mean the vinyl tubes behind the bottom lid assembly are obstructed. Remove the assembly, check the tubes for any obstructions, blockages and that they are each attached to the pump motor housing. If not satisfied, take your
Kreepy Krauly®
Prowler® pool cleaner for repair.
3. If the Prowler does not cover the entire pool, you may have to adjust the timing cycle on the power supply.
The most important tip is if in doubt call your dealer and have your
Kreepy Krauly®
Prowler® pool cleaner repair handled by professionals.
