Salt chlorine generator for in-ground and above ground swimming pools

This self-contained purification system utilizes a natural process to generate pure chlorine. The electrolytic process uses a very low concentration of salt (less then a teaspoon per gallon) and generates free chlorine.  The chlorine continuously kills bacteria and algae and then reverts back to salt. This indefinite cycle leaves the water feeling silky, soft, refreshing and sparkling clear.  Saltron^® is easy to install, economic, and fully automatic.

Portable Chlorine Generator for Spas

Saltron^® MINI Spa Sanitation System produces a pure form of chlorine by electrolysis of salt (NaCl) in order to sanitize your spa water. After the salt is converted to chlorine and the bacteria are killed, the chlorine converts back to salt and this process is ongoing. The salt concentration used is very low (less than that in a human tear). Chlorine output can be easily adjusted by the timer on the power supply unit. The chlorine level in your spa can be checked by using a standard chlorine test kit. One Saltron^® MINI unit can treat up to 600 gallons (2,200L) of spa water (or up to 2000 gallons Swim Spa water).

 

Digital Chemistry Tester for Pools and Spas

The Safedip is a digital chemistry reader designed to make measuring pool parameters easy.  Until now, other products which claimed to be similar really didn’t give the user the ability to measure so many parameters which such accuracy. The Safedip doesn’t require any test strips to work. Simply collect the water sample from the pool or spa using the onboard cup and press the Start button to take your measurement. It’s smart, simple, and gives you results in seconds...

 

Safedip

Free Shipping In Continental USA

$199.99

Proportional Feed System Automatic pH Adjuster

The pH-TEK adjusts the pH level in the pool automatically resulting in a safer pool environment. Maintaining a proper pH level allows the chlorine to effectively kill bacteria. This protects the pool surface and equipment resulting in less repairs and extended service life.
pH-TEK is a must have for pools using salt systems.
Every salt pool has the underlying issue of high pH and the best way to handle it properly is to automatically dose the acid using a proportional feed system.

 

pH-TEK

Free Shipping In Continental USA

$634.00

• Easy installation on new and existing pools - no plumbing required.

• Programmable digital timer to adjust chlorine output.

• LED indicator lights illuminate for easy salt level reference.

• Commercial grade titanium cell plates coated with precious metals.

• Reverse polarity keeps cell clean and prevents scaling.

• Clear cell housing allows user to easily inspect cell for scaling.

• Switch-mode power supply supplies smooth current to cell resulting in longer lifetime.

• Critical fault protections with automatic shut-down.

• Helps keep a consistent Free Chlorine residual.

• For any in-ground or above ground spa or swim spa up to 2,000 gallons.

• Independent from the spa filter and pump system.

• Reverse polarity every 2-4 hours on cell.

• Comes with cell holder which conveniently gives the cell a home while bathing.

• Replaceable cell.

• Easy to set-up and no installation or plumbing required.

• No more purchasing, transportation or storage of chlorine.

• No more skin irritations and itchy red eyes.

• Eco-friendly and very minimal electricity required.

• LED indicator lights illuminate for easy salt level reference.

• Commercial grade titanium cell plates coated with precious metals.

• Switch-mode power supply supplies smooth current to cell resulting in longer lifetime.

• Critical fault protections with automatic shut-down.

• Large digital LCD display

• Easy push- buttons

• No color matching

• Measures pH, FC (free chlorine), Salt, TDS, ORP, Temp

• Commercial grade sensor technology

• AAA battery makes for easy replacement compared to other digital readers

• LED indicator light illuminates if pool is safe to swim

• pH probe-replaceable in seconds

• Extremely user friendly

• Built-in sample cup allows user to retrieve water sample and take readings away from the pool

• One point calibration is quick and easy to do

• Water- resistant housing

• Probe protector keeps electrodes safe and even has a storage area while taking readings

• Memory function automatically stores the previous measurement for easy comparison

• Can be used on many types of water including pools, spas and ponds

• Can be used in any in-ground or above-ground pool up to 60,000 gallons.

• Turnkey package: Contains controller, chemical tank, probe, fittings, tubing, buffer solution.

• Automatically tests and balances pH.

• Uses a proportional feed algorithm that continuously tests the water.

• Indicator lights show alarm status.

• Built-in overfeed protection.

• One point single calibration.

• Automatic restart in the event of a power failure.

• Rugged weather and corrosion resistant enclosure.

• Reduces pool and equipment maintenance.

• Reduces acid use up to 40%

• Eliminates unhealthy highs and lows.

• Critical fault protections with automatic shut-down.